Skip to content

iFace26 Homepage Features

Homepage Overview

The iFace26 homepage has been optimized and includes the following core features:

1. Top Buttons

  • Report History (Document Icon): View locally stored measurement history records.
  • Records are saved starting from the iFace26 upgrade and are not uploaded to the AMOS cloud, remaining stored locally only.
  • Each record is displayed as a card, including a blurred image (hardware-level frosted glass processing for privacy protection), and measurement status (success/failure).
  • Delete Records: Click the trash icon in the top right corner to clear all records; this action is irreversible, so use with caution.
  • Deletion Methods: Supports select-all and single-select to delete specified measurement records.
  • Failed records can be re-measured: Click a failed record and confirm to reuse saved data for re-measurement.
  • Settings: Adjust language, voice, shooting settings, etc. (see Software Settings for details).

2. Measurement Entry

  • AMOS Frame Measurement: Use the AMOS measurement frame to simulate glasses and measure fitting parameters.
  • Existing Frame Measurement: Measure fitting parameters for existing store frames.
  • PD Measurement: Pure PD measurement (do not wear a frame).
  • Icons next to the buttons distinguish AMOS frame measurement, existing frame measurement, and PD measurement.

3. Video Tutorials

  • Official AMOS frame, existing frame, and PD measurement tutorial videos, produced by AMOS, are located at the bottom and can be viewed by clicking.

4. Permissions and Time Correction

  • Permission Reminders: iFace requires camera permissions (for shooting) and app installation permissions (for upgrades). If not granted, a pop-up will appear on the homepage.
  • Time Correction: If the system time is incorrect, a prompt will appear on the homepage to correct it (go to "Settings > Time"). An incorrect time may prevent internet access.

Detailed Report Page

  • Content:
  • Store and customer Information: Store name, order number, frame style, name, age, phone number (name and the last four digits of the phone number can be manually entered and are stored locally only).
  • Measurement Data (unit: millimeters):
    • Distance Pupil Distance (right eye, left eye)
    • Near 30cm Pupil Distance (right eye, left eye)
    • Pupil Height (right and left eyes; AMOS frame measurement data requires syncing to AMOS for recalculation based on the selected frame)
    • Face Width (used to adjust temple spread)
  • Fitting Parameters:
    • Temple Length (only for AMOS frame measurement; not available for existing frame measurement)
    • Lens-Eye Distance (BVD)
    • Forward Tilt Angle
    • Frame Curvature
    • Frame A Value (width of the left and right frames)
    • Frame B Value (height of the left and right frames)
  • Operations:
  • Print Report: Requires a connected printer to print the full report.
  • Sync Data: Upload data to AMOS for recalculation based on the user's selected frame parameters.
  • AI Indicator: A triangular AI icon in the top left corner of the report indicates that the results were generated by AI calculations.